NASA Logo, National Aeronautics and Space Administration
NASA Space Science Data Coordinated Archive Header



Availability: Archived at NSSDC, accessible from elsewhere


This description was generated automatically using input from the Planetary Data System.

Data Set Overview

This data set contains information on the dust environment in interplanetary space within the inner solar system and in the Jupiter system, within and without the Jovian magnetosphere and around the Galilean satellites. This information is collected with a dust impact experiment, DDS, from which may be inferred direction of motion, mass, velocity and charge. (See the instrument catalog file for further information.) The data presented in this dataset include instrumental readouts, inferred metadata, calibration information and a calendar of events. Specifically: 1) - data received from the dust detector, the spacecraft, and physical properties derived from the detector data for reliable dust impacts (Gruen et al. 1995b, Krueger et al. 1999b, Krueger et al. 2006, and Krueger et al. 2009). 2) - data received from the dust detector, the spacecraft, and physical properties derived from the detector data for reliable dust impacts plus noise events. 3) - value ranges corresponding to codes found in 4) - laboratory calibration data used to relate instrument responses to physical properties of the impacting dust particles. 5) - the area of the dust detector exposed to particles as a function of their velocity direction relative to the detector axis. 6) - time history of Galileo mission and dust detector configuration, tests and other events. The data received from the spacecraft are used for determining the location and orientation of the spacecraft and instrument. Given are the SPACECRAFT-SUN DISTANCE, ECLIPTIC LONGITUDE, ECLIPTIC LATITUDE, SPACECRAFT-EARTH DISTANCE, ROTATION ANGLE, DETECTOR ECLIPTIC LONGITUDE, and DETECTOR ECLIPTIC LATITUDE. Full spacecraft ephemeris and orbit/attitude data (SPICE) are available at the PDS Planetary Plasma Interactions (PPI) Node, at

Data received from the dust detector are given in an integer code format. Some of the integer codes represent a range of values within which the data could fall (e.g., ION AMPLITUDE CODE), some may represent a specific value (e.g., ION COLLECTOR THRESHOLD), and others, a classification based upon other integer codes (e.g., EVENT CLASS). Information for interpreting the codes and flag values given in the data files and is given in the file galdinfo.asc in the document directory. The instrument data consists of cataloging information, instrument status, instrument readings at time of impact, and classification information. The cataloging information includes the SEQUENCE NUMBER (impact number), JULIAN DATE (time of impact), and SECTOR (the pointing of the instrument at time of impact). The instrument status data are the threshold levels of the detectors and the CHANNELTRON VOLTAGE LEVEL. The instrument readings include the amplitude codes of the detectors aboard the instrument and the integer codes representing the charge level rise times of the detectors, the difference in starting times of the ion signal and the electron signal, electron and ion signal coincidence, and ion and channeltron signal coincidence. The classification information is used to assist in classifying an event into probable impact and non-impact categories. There are three variables used in classification: EVENT DEFINITION which records which detectors begin a measurement cycle; ION AMPLITUDE RANGE which is the classification of the ION AMPLITUDE CODE into 6 subranges (used with EVENT CLASS); and EVENT CLASS which categorizes events into a range of probable impacts to probable non-impacts. The PARTICLE SPEED and PARTICLE MASS and their corresponding error factors are determined from the instrument and calibration data given in and, respectively. In 2010 it was discovered that the julian dates provided in the files and had been calculated incorrectly from the UT times. The julian dates were recalculated and the data set was incremented from version 4.0 to version 4.1.

Calibration Data

ION RISE TIME, ELECTRON RISE TIME, ION CHARGE MASS RATIO, and ELECTRON CHARGE MASS RATIO were measured for iron, glass, and carbon particles of known mass and impacting at known speeds. Since the composition of particles striking the Galileo spacecraft is unknown, logarithmic averages of the above values are used to infer the particle speed and mass from the instrumental measurements. See Goller (1988). The data were provided in a private communication to M. Sykes (Jun 29 03:04 MST 1995) by M. Baguhl. They are the results of these experiments for impacts at an angle of 34 degrees from the detector axis.

Processing Level

The data contain different levels of processing. Some processing was done at the time of the impact observation. This processing categorized the detector responses to transmit the data efficiently back to Earth. Data received on Earth is given as an integer code. These integer codes can, for example, represent ranges of values, or can be a classification determined from other integer codes. On Earth, these integer codes were then fit to calibration curves to determine the speed and mass of the impacting particle (Goller and Gruen 1989; Gruen et al., 1995c). This data set contains the information from the spacecraft instrument as received on Earth, information about the location and pointing direction of the spacecraft, and the physical properties determined from the data analysis. The calibration data are included as part of this dataset.

Sampling Parameters

The occurrence of an impact with the instrument begins a measurement cycle. The on-board detectors measure a charge accumulation versus time in order to measure the rise time of the accumulation and any coincidences between detector readings. The on-board computer converts these measurements to integer codes to minimize the amount of data that is transferred back to Earth. After the conversion, the integer codes are categorized to determine if an event is more likely to be an impact or noise event. The data are then stored until it is time to transmit to Earth.

Data Reduction - Impact Speed

Impact speed (V) is obtained from the rise-time measurements of the ion and electron detectors (IT and ET, respectively) using procedures described in part by Gruen et al. (1995c) and a private communication to M. Sykes (Jul 22 03:43 MST 1995) from M. Baguhl. The calibration tables used correspond to the mean values obtained for the three different projectile materials with which the instruments were calibrated (Goller and Gruen 1989; Gruen et al., 1995c). A rise-time measurement is started when the respective signal exceeds its threshold and is stopped by a flag pulse from the peak-detector. Impact calibration was performed in the speed interval from about 2 km/s to 70 km/s, so impact speeds derived from rise-time measurements will be limited to this range. Dust accelerator tests as well as experience with flight data have shown that (1) the shape of the ion signal is less susceptible to noise than the shape of the electron signal and (2) for true impacts, ELECTRON AMPLITUDE CODE values (EA) are generally greater than the ION AMPLITUDE CODE values (IA) by 2 to 6. As a consequence, the electron rise-time is only used for impact speed determination if 2 =< EA-IA =< 6. Since both speed measurements, if available, are independent, one obtains two (often different) values VIT and VET, respectively. The impact speed is then taken to be the geometric mean of VIT and VET. Determining VIT: If IA > 16 and IT > 12, then fix IT=14. Else, if IA > 16 and IT =< 12, then add 2 to the corresponding value of IT. VIT is then found in Table 5a of Gruen et al. (1995c) or Note: If IT=0, then VIT is invalid. This differs from Gruen et al. (1995c). Determining VET: If EA > 16 and ET > 12, then fix ET=14. Else, if EA > 16 and ET =< 12, then add 2 to the corresponding value of ET. VET is then found in Table 5a of Gruen et al. (1995c) or Note: If ET=0, then VET is invalid. This differs from Gruen et al. (1995c). If IA=49, or IA=18, or IA<3, then IT is not valid, and only VET is used to determine impact speed. If EA=49, or EA=31, or EA<5, then ET is not valid, and only VIT is used to determine impact speed. If IT is invalid and 6<EA-IA or EA-IA<2, then there is no valid impact speed. If neither IT nor ET is valid, then there is no valid impact speed.

Data Reduction - Impact Speed Error Factor

The upper and lower estimates of impactor speed are obtained by multiplying and dividing, respectively, the mean particle speed by the velocity error factor, VEF. If only one speed is measured, and is from the electron detector, the minimum uncertainty is VEF=2. If only one speed is measured, and is from the ion detector, the minimum uncertainty is VEF=1.9. It is assumed that minimum error of 1.6 is achieved if both individual speeds agree to within a factor of 4. This error corresponds to the logarithmic mean of the minimum errors in the two cases when only a single speed is valid. Since these are all 1-sigma errors, it may happen that VIT or VET fall outside the error bar given for the mean impact speed, V. In order to avoid this, the error factor is 'stretched' to contain the values: If VIT > 4*VET, then VEF=(VIT/VET-4.)/31.*(1.6*sqrt(35.)-1.6)+1.6 If VET > 4*VIT, then VEF=(VET/VIT-4.)/31.*(1.6*sqrt(35.)-1.6)+1.6 (private communication to M. Sykes from M. Baguhl, Mar 6 03:57 MST 1996). If the ratio of both speeds exceeds 4, then the uncertainty can increase to about 10 in the calibrated speed range. In any case, a speed value with an uncertainty factor VEF>6 should be ignored.

Data Reduction - Impactor Mass

Once a particle's impact speed (V) has been determined, the charge to mass ratio can be determined from calibration measurements (Figure 3, Gruen et al. (1995c); The charge to mass ratio for a given impact speed (V) is determined by linear interpolation of the calibration table ( on a double logarithmic scale, yielding a separate value for the ion grid measurement (QIM) and and electron grid measurement (QEM). From these values and the respective impact charges (QI and QE) corresponding to IA and EA, respectively (Table 4, Gruen et al. (1995c);, mass values (MQI=QI/QIM and MQE=QE/QEM) are determined corresponding to the ion and electron grid measurements. When both MQI and MQE are valid, the impact particle mass, M, is the geometric mean of these two values, or the value corresponding to the valid measurement if the other is invalid. If there is no valid impact speed, then there is no valid impactor mass. Note: when V is invalid, M is invalid. Note: when IA=0, QI is invalid and MQI is invalid. Note: when EA=0, QE is invalid and MQE is invalid.

Data Reduction - Impactor Mass Error Factor

The upper and lower estimate of impactor speed is obtained by multiplying and dividing, respectively, the mean particle speed by the mass error factor, MEF. If the speed is well determined (VEF=1.6) then the mass value can be determined with an uncertainty factor MEF=6. Larger speed uncertainties can result in mass uncertainty factors greater than 100. The mass error is calculated from the speed error, keeping in mind that mass detection threshold is proportional to speed to the 3.5th power. In addition, there is an error factor of 2 from the amplitude determination. Added together (logarithmically) these yield MEF=10**(sqrt((3.5*log(VEF))**2+(log(2.))**2)) (Private communication to M. Sykes from M. Baguhl, Mar 6 03:57 MST 1996. This differs from the exponent of 3.4 given in Gruen et al. (1995a))

Coordinate System

The coordinates of the spacecraft are given in heliocentric ecliptic latitude and longitude (equinox 1950.0), where the pointing direction of the sensor is given in spacecraft centered ecliptic latitude and longitude (equinox 1950.0).

On-off times and download times

Galileo DDS was turned on all the time, even during Galileo probe release, Jupiter orbit insertion, a reprogramming event in December 1996 and during several spacecraft safings. However, during these events the high voltage of the channeltron was reduced or switched off and the detection thresholds were raised to reduce the instrument sensitivity for noise events. During Galileo safings DDS continued to measure dust impacts but because of the missing downlink and the limited instrument memory of DDS the majority of the impact data were usually lost. Between 95-341 and 96-087 the high voltage was switched off entirely but still the instrument continued to measure dust impacts. The downlink capability of the instrument limited the number of transmitted events most of the time, in particular when the spacecraft was in the inner jovian system. When no continuous downlink (Realtime Science or RTS) was available, data were received as Memory Readouts (MROs) which gave only snapshots of the dust activity during the previous days or weeks. The periods when these different types download methods were used are listed in the status table ( These times give periods when DDS data were transmitted in the various modes.

These data are available on-line from the Planetary Data System (PDS) at:

Alternate Names

  • GO-D-GDDS-5-DUST-V4.1


  • Planetary Science: Small Bodies

Additional Information



Questions and comments about this data collection can be directed to: Dr. Edwin V. Bell, II



NameRoleOriginal AffiliationE-mail
Dr. Eberhard GruenData ProviderMax-Planck-Institut fur
Dr. Carol NeeseGeneral ContactPlanetary Science
[] NASA Logo -