NASA Logo, National Aeronautics and Space Administration
NASA Space Science Data Coordinated Archive Header

Window Meteoroids Detector

NSSDCA ID: 1970-029A-11

Mission Name: Apollo 13 Command and Service Module (CSM)
Principal Investigator:Mr. Burton G. Cour-Palais


The objective of this experiment was to use to Apollo 13 command module heat shield window surfaces (fused silica) to obtain information about the flux of meteoroids with masses of 1 nonogram or less. About 0.4 sq m of the window surfaces were to be used as meteoroid impact detectors. In addition, the residue and the morphology of the craters produced by these meteoroids were to be examined to obtain information concerning the dynamic and physical properties of the meteoroids. If the assumption were made that the velocity distribution of the smaller meteoroids was the same as that of much larger meteoroids, then this experiment could have provided data on the mass density of the meteoroids. The composition of the meteoroid residue in the crater or in the fused glass was to be determined by use of a scanning electron microscope nondispersive X-ray detector. The window surface was an ideal detector because the surface spallation area was 25 to 100 times larger than the diam of the impacting meteoroid. Thus, a 0.5- to 2-micron meteoroid would have made a 50-micron crater, which could have been detected by a 20x optical scan with a stereozoom microscope. Similar experiments were flown on previous Apollo flights.

Alternate Names

  • Apollo13CSM/WindowMeteoroidsDetector
  • S176


  • Planetary Science: Small Bodies

Additional Information

Questions and comments about this experiment can be directed to: Dr. David R. Williams



NameRoleOriginal AffiliationE-mail
Mr. M. L. BrownOther InvestigatorLockheed Electronics
Dr. David S. McKayOther InvestigatorNASA Johnson Space Center
Mr. Burton G. Cour-PalaisPrincipal InvestigatorNASA Johnson Space Center
[] NASA Logo -